Tascam X-48 Manual de usuario descargar pdf (Pagina 44)

Recorder

• Click the Options menu and select Timebar Format

• Choose either SMPTE or Samples

Clip Properties

To specify information about a clip, open the Clip Properties window:

• Use the Smart tool to select a clip

• Under the Windows menu, select Clip Properties... or press Control-2 from the

keyboard.

• You can change the name of the file, specify an exact start and end point, or move

the clip to the timecode embedded in its Broadcast WAVE file or playhead position.

• You can also specify a fade in and fade out time and shape from this window, mute

or lock the clip position

Another way to edit these values, without opening the Clip Properties window, is

to click the Info button in the display. A new panel opens up below the transport with the

same clip options.

Navigating the Timeline

There are several ways to change the playhead position:

• Drag the bottom scrollbar left and right, then click in the track display to jump to that

position

• Use the Fast Forward and Rewind buttons, either on-screen or on the front panel

• Double-click the timecode position readout and type in a new location with the

keyboard

• Use an external machine control device (see next section on Synchronization)

Status Displays

To the right of the menu displays, you should see a screen similar to the one above. This

shows, from left to right:

• Current sample rate

• Auto Input, All Safe and Timecode Chase status (blue when on)

• DSP load – with several plug-ins loaded, this level may grow higher and slow down

your system

• Project Name

Input Routing

There are two ways to route inputs to tracks:

Routing in groups of 8:

• Select the Windows menu and click Settings

• Click the I/O tab

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 67 68

Sin comentarios

Tascam X-48 Manual de usuario Pagina 44