Tascam X-48 Manual de usuario descargar pdf (Pagina 29)

Configuration

• The X-48 warns you that it will shut down after running this application. Click Yes

(or No) to save your project first.

• The next prompt warns you that you can do some serious damage by misusing the

Disk Management tool, such as modifying the C: drive. Click OK when you're ready

to begin.

• The Disk Management tool opens. Disk0 should be the startup disk, partitioned into

the C: drive (your operating system and program files), and the D: drive (the Data

partition you can write to).

• If you've connected a FireWire drive, you should see it mounted as Disk1. To format

this disk, right-click the bar on the right and select "Format."

• Give the disk a name and click OK twice.

• When you're finished, click the Close box in the top right corner. The X-48 will shut

down. Restart the recorder to begin using your drive.

Front Panel Operation

• Press the DISK button

• Use the Up/Down buttons to select Quick Format and press CHNG.

• Select a drive using the Up/Down buttons and press ENTER.

• The display will ask you if you want to format the drive. Press ENTER/YES.

Factory Defaults

This section tells you how to restore the X-48 to factory defaults:

Mouse/Keyboard Operation

• Open the Windows menu and select Settings

• Click the System tab

• Click the System Settings Reset button. The recorder will ask you if you want to

restore the X-48 to factory settings, click OK.

Front Panel Operation

• Press the SYS button

• Press the Up/Down buttons until you select Settings and press CHNG.

• Select Recall Defaults using the Up/Down buttons and press CHNG.

• The display will ask, Reset settings to factory defaults? Press

ENTER/YES.

Store/Recall User Settings

You can store your own settings for later recall. You might do this if you do multiple types

of sessions that require different configurations:

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Sin comentarios

Tascam X-48 Manual de usuario Pagina 29