Tascam X-48 Manual de usuario descargar pdf (Pagina 40)

Recorder

Undo/Redo

Unlike tape machines, you can undo a recording pass and then put it back with redo.

Undo/redo is only available from the mouse/keyboard interface.

Mouse/Keyboard Operation (only)

• Click the Edit menu and choose Undo or press Control-Z on the keyboard.

Metering

Several metering parameters are available:

• Peak Hold displays the highest signal level achieved, either for a few seconds or

until cleared.

• Meters can be Pre-fader or Post-fader (not applicable in Mixer Bypass mode). This

means that the meters show the signal level either before or after the signal hits the

mixer interface.

• (GUI only) you can View Masters to see the signal level for the group and aux

channels.

Mouse/Keyboard Operation

• Click on the Meter button if meters are not displayed at the top of the

screen.

• Click on the Options menu and select the Meters submenu. From this submenu you

can select Peak Hold and Clear Overloads.

• Click on Options > Meters > Mode to select Pre-Fader or Post-Fader metering.

• Click on Options > Meters > View Masters to see the group and aux master levels, or

click on the on-screen meters themselves.

• To set the amount of time that peak values stay on the meters, click Windows and

select Settings. Click on the Prefs tab and change the Clear Overloads pulldown to

change the interval to 1 second, 5 seconds, 30 seconds or Hold (infinite).

GUI Meter Display

You can display the meters by clicking the bargraph icon in the center of the screen

or by pressing 1 on the keyboard.

Front Panel Operation

• Press the PREF button and scroll to the Meters sub-menu and press CHNG.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 67 68

Sin comentarios

Tascam X-48 Manual de usuario Pagina 40