Tascam GigaStudio Manual de usuario descargar pdf (Pagina 56)

56 TASCAM GigaEditor 4 Manual

11. Now select the Loud layer dimension only, and change the “Attenuation controller invert” parameter

to “Yes”. is will reverse the eect of the Mod Wheel on the Loud layer’s volume, creating a simple

crossfade between the loud and so layers. As the Mod Wheel moves from 0 to 127, the so layer

will fade out and the loud layer will fade in.

12. Save the instrument and load it to a MIDI

channel.

13. Hold down the Note E2 while moving the Mod-Wheel back and forth. You should hear a smooth

cross-fade between the so and loud layer.

You can also do custom in and out points using the Crossfade Editor. is tool can handle any number of

layers. When you use this method, leave the “Control invert” parameter set to “No” for all layers. e

crossfade is dened instead by a set of four parameters:

Crossfade in start

Crossfade in nish

Crossfade out start

Crossfade out nish

Typically each layer will have its own set of fade points, coordinated with those of the other layers. e

Crossfade Editor allows the crossfades for all layers to be visualized and edited graphically. In the example

below, Layer 1 will gradually fade to Layer 2 as the Mod Wheel rises through the middle part of its range.

Up to 128 layers are supported.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 209 210

Sin comentarios

Tascam GigaStudio Manual de usuario Pagina 56